.product_section .product_form, .product_gallery { opacity: 1; } .multi_select, form .select { display: block !important; } .image-element__wrap { display: none; }

Your Cart is Empty

Products

Power Amplifier

Headphone Amplifier

Line Amplifier

Digital to Analog Converters

Benchmark System Calculator

by Benchmark Media Systems November 23, 2022 1 min read

BENCHMARK SYSTEM CALCULATOR
Select DAC Calibration: +24 dBu at 0 dBFS, XLR Input (Benchmark DAC) 4 Vrms at 0 dBFS, XLR Input (Typical HiFi Balanced) 2 Vrms at 0 dBFS, RCA Input (Typical HiFi Unbalanced)	Select AHB2 Amplifier Mode: Stereo Bridged Mono
Enter LA4 Volume Setting: dB
Enter Speaker Sensitivity: dB SPL (2.83 V, 1 Meter) (1 Watt, 1 Meter)	Select Speaker Impedance: 4 Ohms 8 Ohms
Distance from Speaker(s): Meters
Select Number of Speakers: One Speaker Two Speakers	Select Room Configuration: Anechoic Chamber or Large Open Space Typical Listening Room Speakers mounted on or in front wall

CONTRIBUTING FACTORS
Amplifier Output Level: dB (relative to 2.83 V)
SPL from single loudspeaker: dB SPL (2.83 V, 1 meter)
Gain from multiple loudspeakers: dB
Loss due to distance: dB (relative to 1 meter)
Gain from room reflections: dB (typical - may vary)
RESULTS
Peak Output Level (at typical listening position): dB SPL
Amplifier Headroom (at Peak Output): dB
Amplifier Peak Output Power: Watts

Note: If the input parameters would cause clipping, the results show the maximum un-clipped output, and the "Amplifier Headroom" window will read "Amplifier Clipping!". When this occurs, reduce the "Input Level" to achieve an "Amplifier Headroom" of 0 dB.