Buy one component and save 10% on up to 2 cables. Buy 2 components and get 4 free cables. Free shipping on USA orders over $700.
Buy one component and save 10% on up to 2 cables. Buy 2 components and get 4 free cables. Free shipping on USA orders over $700.
Your Cart is Empty
by John Siau April 03, 2025
Benchmark's AHB2 power amplifier has a unique feedforward error correction system that cancels distortion before it reaches the speaker terminals. In contrast, global feedback systems attempt to correct the distortion after it reaches the speaker terminals.
Benchmark's AHB2 blends feedback with feed-forward correction to leverage the best characteristics of each.
by John Siau February 20, 2025
An FFT analyzer is like an audio microscope. It allows us to easily measure the frequency and amplitude of tones that are below the level of the noise. Traditional audio meters fail when the signal is lower than the noise level, but with an FFT, we can accurately measure tones that are 30 to 40 dB below the level of the noise.
In many ways, our ears behave like an FFT audio measurement system. Our ears can detect the frequency and amplitude of tones that are as much as 30 dB below the ambient noise. This means that our ears are 30 dB better than traditional audio meters! This is why we can carry on a conversation in a noisy room, and this is why we can hear individual instruments within an orchestra. This is also why small defects need to be detected and corrected when designing top-quality audio gear.
John Siau, Benchmark’s lead Engineer, will explain the “magic” of the FFT analyzer without the use of advanced mathematics. He will show an FFT analyzer in action, and he will measure a complete Benchmark chain to determine if it produces audible noise or distortion. Learn how to read an FFT plot and learn what to look for when selecting audio components.
by John Siau September 03, 2024
Benchmark's AHB2 Power Amplifier is radically different from every other audio power amplifier on the market. It delivers the lowest distortion and lowest noise of any commercially available power amplifier. The THD+N and SNR specifications are 20 dB better than many high-end hi-fi power amplifiers. The unique high-efficiency design delivers hundreds of watts from a relatively small, passively cooled chassis.
Benchmark's lead Engineer, John Siau, will take us on a deep dive into the AHB2. You may be shocked by what is inside!